NORTH BREVARD D-STAR REPEATER
The KJ4OXT D-Star repeater will be moving to Parrish Medical Center on the 6th floor in Titusville FL. soon.
The antenna height is approximately 200 ft. above sea level on top of the hospital.
The Repeater will have 2 meter VHF and Gateway.
To Register on the KJ4OXT repeater:  Registration  (Not available at this time)
NOTE: Only register ONE TIME for gateway use. If you have already registered, do not register again.
KJ4OXT Dplus Dashboard: Dashboard.   (Not available at this time)
KJ4OXT PORTS:
Port C: VHF 147.030 Mhz + offset Digital Voice and Data.
Port G: Internet Gateway
The port designator s (C, or G) should be in the 8th position when programming. KJ40XT_C   ( _ ) is a space
                                                                                                                           
        1  2  3 4  5  6 7  8  spaces
The repeater went on line February 27, 2010.
Program your radio as follows:
Gateway:
My Call    Your own call sign
UR Call    CQCQCQ, station to station, Link, or reflector.
RPT1    KJ4OXT_C    This can be port A, B, C, G.
RPT2    KJ4OXT_G    Internet Gateway port.
Local:

My Call    Your own call sign
UR Call    CQCQCQ
RPT1    KJ4OXT_C    Can be port A, B, C.
RPT2    BLANK   Turns off the Gateway
Repeater to Repeater:
My Call    Your own call sign
UR Call    KJ4MMCCL, Orlando AES Repeater.
RPT1    KJ4OXT_C
RPT2    KJ4OXT_G    Internet Gateway.
Call Sign Routing:
My Call    Your own call sign
UR Call    KJ4BOJ   Person you are calling
RPT1    KJ4OXT_C    Can be port A, B, C, G.
RPT2    KJ4OXT_G    Internet Gateway.
Reflector Linking:
My Call    Your own call sign
UR Call    REF001CL
RPT1    KJ4OXT_C    Can be port A, B, C, G.
RPT2    KJ4OXT_G    Internet Gateway.
Remember:
The port designator is in the 8 position.
"_" underscore is a space.
EX: N4XX_ _ _ C, KJ4OXT_C
REF001CL take all positions. L stands for link in the 8th position
HOW TO IDENTIFY ON A D-STAR REPEATER:
It is suggested that you identify using:

(Callsign) (Status-Mobile, Portable, etc) (on Repeater) (port "C", port "B", Port "A") (reflector) (City).
Example: "This is N4XXX portable (HT) on KJ4OXT Port C, Cocoa FL"
Example: "This is N4XXX mobile on KJ4OXT Port C, Cocoa FL"
Example: "This is N4XXX on KJ4OXT Port C, reflector 1 C Cocoa, FL"
GOOD AMATEUR D-STAR PRACTICE
All repeater users are expected to operate in the manner described in the FCC rules and operating guidelines published in the ARRL Repeater Directory or similar publications. Following are specific operating practices expected of users of the KJ4OXT repeater.
You must clearly identify your station in the manner specified by the FCC.  It is suggested that you identify in the following manner to avoid confusion on reflectors: (Callsign) (Status-Mobile, Portable, etc) on KJ4OXT port (C or B - B for 444, C for 147.030) (City) - Example: “K4CLA portable on KJ4OXT Port C, Rockledge, Florida”
Please wait for the repeaters and Gateway ID following each transmission and wait 1-2 Seconds before keying up again.  This allows others to join the conversation and will allow any station with an emergency to break in.  This is very important when talking on the gateway as there are some delays involved and quick-keying can keep other users from accessing the reflector or repeater.
Do not monopolize the repeaters.  The repeaters are a place for round-table discussions where each party should have an equal chance to participate in the discussion.  The repeaters are not a place for you to broadcast.  Be courteous and leave breaks for others especially when connected to a reflector.
Many people (including non-hams) listen to the repeaters. Use language you would use with someone whom you wished to favorably impress.  Rude, offensive or threatening language is inappropriate and violates repeater and/or FCC rules.  Personal attacks on other repeater users WILL NOT be tolerated.
Remember when you are on the repeaters you are connected to the world.  When connected to reflectors your conversations may be heard over 20 or more repeaters worldwide.
Use proper amateur radio language and pro-signs. Language that is generic to other services (e.g., CB, commercial, public service) is generally inappropriate for use on amateur radio. (IE: “10-4 Good Buddy” is not appropriate)
Do not acknowledge the presence of jammers and malicious interference. Try to work around them. Do not talk about interference or inappropriate activities on the air!
You are welcome to link or unlink the repeater as you desire. When doing so follow these guidelines.    Please check the status of the repeater. Put KJ4OXT_I in your UrCALL field (_ equals spaces) and key up prior to linking or unlinking. This will trigger an announcement with the current state of the link. to make sure nobody else is using the link or the repeater before linking/unlinking. Remember after checking the link, change Ur Call back to CQCQCQ.
When you are done using the link please return it to the default state (Port C - 147.030 - Unlinked).  If the link is abused you may have your gateway access disabled. The use of the repeaters is a privilege, not a right
Priorities for communications on the KJ4OXT repeater
Emergency traffic related to safety of life or property
Scheduled Local Net activities
Intentional station to station communications, linked or local
Unscheduled local station to station communications (ragchewing)
Linked monitoring of a reflector or another repeater regardless of the reason
                             
                 Left to right, Bob N6USP, Glenn N3EH
                         
                  
Copyright © 2011 [Brevard Amateur Radio Society]. All rights reserved.

Copyright © 2011 [Brevard Amateur Radio Society LOGO]. All rights reserved.

Revised: August 31, 2014 Brevard Amateur Radio Society Logo ©2011. Up dated by N6USP All rights reserved.